Yonder
← Feed Yonder

Feed ACARS

Share locally decoded aircraft messages with Yonder over HTTPS.

Get your station credential

Tell us your nearest airport or region and which protocols you receive. We’ll send you a station ID and scoped token in a private credentials file.

Request ACARS credentials

Set up your decoder

For VHF ACARS or VDL Mode 2, use a general-purpose receiver from an RTL-SDR Blog retailer and a VHF airband antenna. Use a dedicated dongle if your ADS-B receiver runs at the same time.

Decode ACARS with acarsdec or VDL Mode 2 with dumpvdl2. Confirm your decoder shows messages before configuring forwarding.

Forward decoder messages

Download the Yonder radio forwarder. Run it with Python 3 on the decoder host and save the private credentials file we supply as station.credentials.json.

mkdir -p spool
chmod 600 station.credentials.json
python3 radio-forwarder.py --credentials station.credentials.json \
  --protocol acars --port 15560 --spool ./spool/acars.sqlite3

In acars_router, append 127.0.0.1:15560 to AR_SEND_TCP_ACARS. For VDL Mode 2, run a second bridge with --protocol vdl2 --port 15561 --spool ./spool/vdl2.sqlite3 and append its destination to AR_SEND_TCP_VDLM2. Keep your existing destinations. When the router is containerized, use the bridge’s reachable hostname on a private network and keep its listening ports private.

The bridge buffers messages during outages. Custom senders can POST one JSON object per request to https://api.skystackaviation.com/v1/feeders/STATION-UUID/messages/PROTOCOL with the X-Feeder-Token header. SkyStack returns HTTP 202 on acceptance.

Check your feed

Watch the forwarder’s logs for errors. An authenticated GET to https://api.skystackaviation.com/v1/feeders/STATION-UUID/status with the same token shows recent station activity.